A well-regarded executive and Corporate Board expert, Mr. Day has been involved in firms engaged in defense, national and homeland security, and emergency management. He has extensive experience in mergers and acquisitions, capitalization, public companies’ corporate governance, compensation planning and corporate development. He served as the Chairman of the Board of Secure Waters Security Group, Inc., a maritime security firm providing armed and unarmed personnel for high-risk facilities. Stephen also worked as the CFO of the Diogenec Group, a well-regarded think tank providing strategic planning and public policy for major catastrophic health care issues for the Defense Department, DHS, CDC, and the UN. Mr. Day’s company, Day Technology Group, provided combat medic training to the U.S. Army Medical Department Center and School at Fort Sam Houston, Texas. Mr. Day has served on numerous boards of companies involved in emergency medicine and pre-hospital services (EMS), maritime security, information technology and software, cyber security, logistics, commodities trading, merchant card services, and chemical-biological decontamination. He is qualified to serve on the audit, governance, and compensation committees of boards of directors. Stephen owns the Board of Directors Society LinkedIn group -- one of the largest corporate board communities on LinkedIn that focuses on efficient board practice for both private and public corporations. Mr. Day divides his time between Washington, D.C. and Florida
Dr. Tannenbaum is a professor in the Department of Materials Science and Chemical Engineering and a member of the Stony Brook Cancer Center at Stony Brook University in New York. To date she has published over 200 peer-reviewed articles, reviews and conference proceedings. She is the recipient of numerous awards, she serves on the Advisory Board of several professional journals and is a member of several national and international professional societies. Dr. Tannenbaum’s areas of interest are soft condensed matter and complex fluids, bio-based functional nanomaterials, and bio-nanostructures tissue imaging and targeted drug delivery
Dr. Niloufar RaeisHosseini (Nellie), is a research associate in the Department of Electrical and Electronic Engineering (EEE), Imperial College London, where she conducts her research in a multi-disciplinary team of “Circuit and Systems”. She is an awardee of “Newton International Fellowship” offered by the “Royal Society”. She has fulfilled her first postdoctoral fellowship by awarding a professional research grant from the National Research Foundation (NRF) of South Korean government by joining in “Nanoscale Photonics & Integrated Manufacturing” group at “Pohang University of Science and Technology” (POSTECH), soon after receiving her Ph.D. in “Nanoelectronic Materials and Devices” from the same university. POSTECH as a world-leading research-based university was a place where she gained more than seven years of successful experiences in thin film semiconductor processing, subwavelength nanofabrication, and development of nanoelectronic focusing on Nonvolatile Memories (NVMs), and Neuromorphic Devices. In addition to obtaining practical skills in the fabrication of nanoelectronics, optoelectronics, and nanophotonic devices under a cleanroom environment, she fabricated chalcogenide-based metadevices and realized the origin of switching phenomena using conductive atomic force microscopy (c-AFM) in atomic scale
Professor Kaneko Katsumi is working as a Distinguished University professor at Shinshu university, Japan. His Education is B.T. In Applied Chemistry from Yokohama National University, 1969 M.S. In Chemistry (Physical Chemistry) from The University of Tokyo, 1971, Dr. Sci. Faculty of Science, The University of Tokyo, 1977 and his Professional Experience, From 1992-2010 Professor Department of Chemistry Chiba University. From 1972-92 he worked as a Assistant professor and Associate professor in Chiba University. He was awarded from various societies like Carbon Society of Japan, Chemical Society of Japan. He got Charles Petinos Award by American Carbon Society and he is the fellow of Chemical Society of Japan and Royal Society of Chemistry. In the year 2016 he was awarded by American Institute of Chemical Engineering, Separation Division Award.
Vladimir Sergeevich BYSTROV – PhD, Dr. Habil. Phys. (University of Latvia, Riga), Dr.Sci. Phys.&Math. (Russian Academy of Sciences) since 1993 – has expertise in various fields of the Computational Molecular Modeling and Material Sciences: ferroelectrics polymer PVDF/PVDF-TrFE thin films, graphene/oxide graphene and composite nanomaterials; amino-acids nanocrystals, peptides nanotubes, hydroxyapatite, etc. Computational studies of nanostructures were made using various methods (ab initio, DFT, semi-empirical methods, molecular mechanics), molecular dynamics on the base of HyperChem, AIMPRO, VASP, etc. He is Head of Group for Computer Modeling of Nanostructures and Biosystems of IMPB-KIAM RAS.
Xuecheng Chen has completed his PhD from Technical Institute of Physics and Chemistry, Chinese Academy of Sciences (CAS), China and postdoctoral studies from West Pomeranian University of Technology, Poland. Now he is the professor of Nanomaterials Physicochemistry Department in West Pomeranian University of Technology. His research is focusing on the preparation of porous carbon materials and the applications in electrochemical energy stroage, for example, lithium ion battery and supercapacitor. He has published more than 70 papers in reputed journals
National Institute of Advanced Industrial Science and Technology
National Institute of Advanced Industrial Science and Technology
Pyatenko A. was born in 1955 in Russia. He graduated Moscow Institute of Physics and Technology in 1978. He had his PhD degree in Chemical Physics in 1981 at the same University. He had worked as researcher, senior researcher at Institute of High Temperatures Russian Academy of Science (IVTAN). Since 1993 he worked as senior researcher at National Institute of Advance Industrial Science and Technology (AIST) in Japan Since 2001 his main research interests are nanotechnology and laser processing. He published many papers in high rang journals, gave the invited lectures at several international Conferences. He is a specialist in nanoparticle synthesis, modification and resizing using laser technique. Area of expertise nanoparticle synthesis, processing and characterization laser interaction with nanoparticles light absorption and scattering by nanoparticles processes of Nanoparticles aggregation, agglomeration and dispersion
Technological Institute for Superhard
and Novel Carbon Materials
Technological Institute for Superhard
and Novel Carbon Materials
Vladimir Mordkovich has completed his PhD from Moscow State University, Russia and then Dr.Sci. from Institute for Materials Science Problems, Ukraine. He spent 11 years in Japan as a senior researcher in governmental and corporate projects and then returned to Russia to become a head of a New Chemical Technologies and Nanomaterials department at Technological Institute for Superhard and Novel Carbon Materials and also a CTO of INFRA Technology Ltd., an international technology company in gas-to-liquid and gas-to-solid technologies. He has published more than 150 papers in reputed journals and authored 52 patents
National Taiwan University of Science and Technology
National Taiwan University of Science and Technology
Jyh-Chiang Jiang graduated from National Taiwan University in 1986 with a B.S. in Chemistry and received his PhD in Chemistry in 1994 from the National Taiwan University. After working as a postdoctoral fellow at IAMS, Dr. Jiang joined the faculty of National Taiwan University of Science and Technology (NTUST) in 2001
He focuses on the theoretical and computational chemistry study of the heterogeneous catalysis, optoelectronic materials and Li ion batteries. He has worked extensively in the development of combined electronic structure and kinetics methods for simulating processes that involve the reaction mechanisms of H2 production, Hydrogen storage, NH3 oxidation on metal oxide surfaces. Dr. Jiang is also involved in High throughput screening of many new materials for Li ion batteries based on quantum mechanics calculation. In addition, he has been active for many years in design of the optoelectronic materials for DSSCs using quantum mechanics simulation. He has more than 170 papers in peer-reviewed journals. His research has also resulted in 4 patents.
Adewole O has vast & strong expertise in numerical and computational methods, models, he also has strong and intense passion for material science, biochemical engineering, systems biology and imaging. He has wide and broad research experiences covering computational and numerical methods, models, stochastics and economics, Literature Arts, material sciences and quantum mechanics. He is currently the founder, manager and overseer of “Campagna Global Literary Edifice”, which was fully incorporated in Lagos in March, 2017. Other recent research areas include a task to unravel more frontiers in the field of ‘bio-ethanol, fermentation & chemical processing’ and develop numerical based results in this filed in the nearer future. More results would be made available in this field in upcoming events and the nearest future
Smain FEMMAM is Director of research at the University of Haute-Alsace France and
responsible of the Research team on Signals & Safety Systems of Polytechnic Engineers
School Sceaux France. He received the MS and Ph.D. degrees in Signal Processing and
Computers from Versailles University, France in 1997 and 1999 respectively. Since 2013 he
is promoted to a rank of senior director of research (HDR). After that, he joined the CMU
Carnegie Mellon University & West Virginia University as Postdoc Fellow and Distinguished
Visiting Professor. His main research area is signal processing, safety systems,
communication and embedded systems. He has a strong interest in perception and
characterization of signals, optimal filtering, spectral analysis, wavelets and perception
haptics. Dr. Femmam is a senior member of IEEE, SEE and GDR ISIS. Member of IEEE
C.A. committee France section. Board of Director of the Institute for Engineering and
Technology Innovations in the World. He has guided numerous thesis projects, including
some doctoral theses. He is active reviewer for several scientific academic journals and
committee member of international conferences. He is the (Academic, Chief) Editor-in-Chief,
Editor, Editorial Board, Guest Editor & Advisory Board members of more than 20
International Journals. He has authored and co-authored more than 90 papers, four Chapters,
one edited Book, seven Books published by Wiley & Elsevier.
Dr. Alexander L. Kalamkarov is a Professor of Mechanical Engineering at the Dalhousie University in Halifax, Canada since 1993, and Director of Smart Materials Centre since 1995. He was awarded PhD degree from the Moscow Lomonosov State University in 1979 and the Doctor of Sciences (Habilitation) from the Academy of Sciences of the USSR in 1990. His academic career spans over 40 years in Research and University teaching. He has taught in the Universities in the USA, England, France, Australia, Japan, Brazil and visited numerous Universities and Research Institutes around the world. Prof. Kalamkarov is awarded the CANCAM Gold Medal for the “outstanding contribution in the area of Applied Mechanics” in 2011. He is awarded the Fellow of the American Society of Mechanical Engineers (ASME) in 2002; the Fellow of the Canadian Society for Mechanical Engineering (CSME) in 2001; and the Fellow of the Japan Society for Promotion of Science (JSPS) in 2007. Prof. Kalamkarov has served as a Vice-President of the Canadian Society for Mechanical Engineering and is a Member of numerous prestigious International Editorial and Advisory boards in the area of composite materials and smart structures.
Research performed by Prof. Kalamkarov in the areas of advanced composite materials and smart materials and structures is internationally recognized. He has authored more than 350 research publications, including 150 refereed journal papers, 8 Research Monographs and 2 US patents. Prof. Kalamkarov has made major contribution to the fundamental analysis, design and optimization of composite materials and smart composite structures, composite reinforced shells and plates
National Polytechnic University of Armenia
National Polytechnic University of Armenia
Gagik Shmavonyan has completed his PhD from National Polytechnic University of Armenia and postdoctoral studies from National Taiwan University. He is Professor at National Polytechnic University of Armenia. He was Visiting Professor at the University of Hull, Polytechnic of Milan, University of Bremen, Free University Berlin, Trinity College Dublin, University of Santiago de Compostela, University of Cergy-Pontoise and National Center for Research "Demokritos" Athens. He has published 100 papers, 20 patents, 4 books, a chapter in international textbook and has been serving as an editorial board member. His most significant awards are: Cleantech Oscar (Silicon Valley, USA) and ARPA (USA)
His professional field is to focus Chemistry and Process Engineering in Supercritical Fluid. He has developed supercritical CO2 green technique to produce graphene and other few layers of 2D materials including BN, WS2, and MoS2, et al., based on which a series of composites with the polymer has been prepared as thermal, electrically conductive and corrosion-protected materials. He has developed many production lines for extraction of natural materials including bioactive substances, natural pigments, and ingredients based on supercritical CO2 extraction technology. He has developed a polymer foaming technique based on supercritical CO2, like the industrial production of TPU foaming bead. He has developed a supercritical fluid technology to produce nanomaterials including nanomedicine.
He has carried out more than 20 items of the project coming from National Natural Science Foundation, 863 High Technology Program and industry funding. He has published more than 120 articles and hold more than 20 pieces of the patent.
Shen-Ming Chen received his Ph.D. degrees in chemistry from National Taiwan University, Taipei, Taiwan. He was a visiting postdoctoral fellow with the Institute of Inorganic Chemistry, Friedrich-Alexander University Erlangen-Nuremberg, Germany in 1997. He had been an associate professor of Department of Chemical Engineering, National Taipei Institute of Technology, Taipei, Taiwan from 1991 to 1997. Since August 1997, he has been a professor of Department of Chemical Engineering and Biotechnology, National Taipei University of Technology, Taipei, Taiwan. From 2010, he has been a Distinguished Professor of Department of Chemical Engineering and Biotechnology, National Taipei University of Technology, Taipei, Taiwan. He has been the Dean(Curator) of the library, National Taipei University of Technology, Taiwan from 2000 to 2006 and the Director of Extracurricular Activity, the office of student affairs, National Taipei University of Technology, Taiwan from 1995 to 2000
Dr. Jean-François SILVAIN is a Senior Researcher in the “Institut de Chimie de la Matière Condensée de Bordeaux” (ICMCB-CNRS) and an Adjunct Professor of Engineering at the University of Nebraska – Lincoln (USA). He received his bachelor’s degree from Poitiers University (France) in 1980, and PhD degree from Poitiers University (France) in 1984 both in Material Science. From 1987 to 2002, he was a CNRS Research Fellow at the University of Nancy (France). He joined the “Institut de Chimie de la Matière Condensée de Bordeaux” (ICMCB-CNRS) in 1992. He has over 20 years of experience in composite materials processing and characterization at micro/nanoscales. Dr. SILVAIN’s main field of interest is the processing and the characterization of ceramic and inorganic multi materials ranging from metal and ceramic matrix composite (CMC and MMC) to functionally graded materials (FGM) with the aim to develop materials with adaptive physical (thermal, electrical) and/or mechanical properties. Dr. SILVAIN is currently working on new processes, for metal powders, such as hot extrusion process, equal-channel angular pressing, microwave sintering (with and without pressure), and spark plasma sintering and on laser-mater interaction and additive manufacturing with the University of Nebraska Lincoln (USA).
Dr. SILVAIN has authored or co-authored over 160 journal papers and 150 conference papers. He has served as chair of international conferences including the Powder Metallurgy Conference in 2012.
Dr. Zaira Zaman Chowdhury is presently working as an Assistant Professor and Industrial Training Coordinator in Nanotechnology & Catalysis Research Centre (NANOCAT), a potential National HICOE and UM COE, University Malaya, Malaysia. She has conducted some research to illustrate the catalytic application of carbon as well as extraction of nano and micro dimensional cellulose. She has contributed more than 65 papers in ISI-Scopus top ranking journals with 63 international Conference Proceedings. Dr. Zaira has received several esteemed award such as Outstanding Nano-scientists Awards in 2018 from India, ISPA Gunasekaran Award-2017 from Indian Spectro-physics Association in 2018, Best article Trophy received from Trophy received for “The Fourth Generation of Antioxidant; Super para-magnetic Nano-antioxidant” International Institute of Engineers & Researchers, New Zealand in 2016, Elsevier’s Atlas award in 2015, Gold Award and Silver Award from Malaysian Inventions and Design Society (MINDS) and University Malaysia Perlis (UniMAP, 2013). She has received CIMA Appreciation Award from Malaysian Inventions and Design Society (MINDS) and University Malaysia Perlis (UniMAP, 2013). She has received Bronze Award from International Engineering Innovation and Invention Exhibition (IENVEX), Universiti Malaysia Perlis (UniMAP 2014). Recently she has received trophy from International Institute of Engineers & Researchers, New Zealand in 2016 for Nano-oxidant preparation and Application
DOCTORAL in Materials Sciences & Engineering at the Federal University of Pernambuco/UFPE; MASTER Materials Science & Engineering at the Federal University of Pernambuco/UFPE; MESTER Civil Engineering & Urban Planning; GRADUATION in Social Planning; GRADUATION in Civil Construction & Design. OMICS 2o & 3o INTERNATIONAL CONGRESSES ON PETROCHEMICAL & CHEMICAL ENGINEERING in 2013 SAN ANTONIO/2014 IN LAS VEGAS/USA. ORGANIZING COMMITTEE MEMBER AT SECOND WORLD CONFERENCE & EXPO ON PETROCHEMICAL / NATURAL RESOURCES, 2018 PRAGUE-CZECH; ORGANIZING COMMITTEE MEMBER TO THE WORLD CONFERENCE GRAPHENE NANOTECHNOLOG, 2019 TOKYO-JAPAN; ORGANIZING COMMITTEE MEMBER TO THE UPCOMING 3o INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE & ENGINEERING, 2019 FRANKFURT-GERMANY; ORGANIZING COMMITTEE MEMBER TO INTERNATIONAL GRAPHENE & CARBON NANOTUBES CONFERENCE, 2019 DUBAI-UAE; ORGANIZING COMMITTEE MEMBER 2o Global Conference on Carbon Nanotubes & Graphene Technologies, 2020 LISBON-PORTUGAL. 3O International Conference and Expo on Petrochemistry & Natural Resources, 2018 PRAGUE- CZECH REPUBLIC. The Global Conference on Carbon Nanotubes and Graphene Technologies, 2019 MILAN-ITALY. 2O International Conference on Earth Science & Geo Science, 2019 PRAGUE-CZECH REPUBLIC. 35o Conference on Materials Science and Nanotechnology, 2019 MELBOURNE- AUSTRALIA. European Congress on Nanotechnology and Materials Science Engineering, 2019 BRUSSELS- BELGIUM. 2° International Conference on Materials Science & Engineering, 2019 PARIS-FRANCE. Examiner Publons Journal ; 2o Books with ISBN; An International Patent; 31 publications of articles; Experience in the field of Petroleum Engineering, Sustainability Energetics, developed researches in Materials Engineering. Acting mainly in the following subjects: Graphene Oxide, Metal Alloys, Films Fine and Catalysts Heterogeneous, Experiences Coordination & Director Complex City of University
Doctoral in Chemical Engineering at UFPE/Masters of Mechanical Engineering-emphasis in Materials Science at UFPB/Bachelor degree in Physics-Solid state at UFCG/Bachelor degree in Industrial Chemistry at UEPB/Bachelor degree in Chemistry at UEPB/Specialist in the teaching of Mathematics by IMPA/UFPB/Specialization course in Chemistry EDX/MITX from the Massachusetts Institute of Technology/22 courses Human Resources in Oil and Natural Gas Program(PRH-28), National Petroleum Agency-Natural Gas (ANP) PETROBRAS (Brazil). OMICS 2o & 3o INTERNATIONAL CONGRESSES ON PETROCHEMICAL & CHEMICAL ENGINEERING in 2013 SAN ANTONIO/2014 IN LAS VEGAS/USA. ORGANIZING COMMITTEE MEMBER AT SECOND WORLD CONFERENCE & EXPO ON PETROCHEMICAL/NATURAL RESOURCES, 2018 PRAGUE-CZECH; ORGANIZING COMMITTEE MEMBER TO THE WORLD CONFERENCE GRAPHENE NANOTECHNOLOG, 2019 TOKYO-JAPAN; ORGANIZING COMMITTEE MEMBER TO THE UPCOMING 3o INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE & ENGINEERING, 2019 FRANKFURT-GERMANY;ORGANIZING COMMITTEE MEMBER TO 1o INTERNATIONAL GRAPHENE & CARBON NANOTUBES CONFERENCE, 2019 DUBAI-UAE; ORGANIZING COMMITTEE MEMBER 2o Global Conference on Carbon Nanotubes & Graphene Technologies, 2020 LISBON-PORTUGAL. 3O International Conference & Expo on Petrochemistry & Natural Resources, 2018 PRAGUE- CZECH REPUBLIC. The Global Conference on Carbon Nanotubes & Graphene Technologies, 2019 MILAN-ITALY. 2O International Conference on Earth Science & Geo Science, 2019 PRAGUE-CZECH REPUBLIC. 35o Conference on Materials Science & Nanotechnology, 2019 MELBOURNE-AUSTRALIA. European Congress on Nanotechnology & Materials Science Engineering, 2019 BRUSSELS- BELGIUM. 2° International Conference on Materials Science & Engineering, 2019 PARIS-FRANCE. 60 publications Technology & Petroleum/ Reviewer Journal of Elsevier; 2o Books with ISBN/ An International Patent/ Award from the Leader of Chemical Engineering Brazil 2018-19.
After completing B.E (V.N.I.T, Nagpur, India) and M.E (I.I. Sc, Bangalore, India) in Metallurgy, Dr. Bhattacharyya earned his PhD degree from Max-Planck-Institut für Metallforschung, Stuttgart and Universität Stuttgart, Germany in the year 2006. He spent 3 years as post doc in different places of Germany and USA. In the year 2009, he joined as faculty member at TIFR, Mumbai and in August 2015 he moved at IIT Madras as an Associate Professor in the Department of Metallurgical and Materials Engineering. His research interest includes development of new methodology related to TEM/STEM to study structure and chemistry of materials at atomic scale to correlate it with materials properties. Among other scientific merits until now Dr. Bhattacharyya has published 38 papers in reputed international journals, solely guided two PhD and couple of Masters students, delivered many invited lectures in international as well as national conferences, served as PhD examiner in various Indian and Foreign universities. Presently he is serving as external academic board member of the doctoral program ‘Nanoscopies of Materials’ of University Cadiz, Spain and as an editorial board member for Scientific Reports.